|
|
|
|
|
Ball screw positioning systems, +/- 0.025mm repeatability, speeds from 10mm/hour to <1000mm/second
|
|
|
|
|
|
Designed to operate actuators with built in potentiometer.
The Actuator follows a signal from a remote potentiometer or variable voltage signal.
Unit fitted with adjustable current limit.
Supply 12-24v DC
Current limit adjustable 1 - 20Amps
|
|
|
|
The AS10 is used as an electronic current limit device for a DC actuator.
The AS10 performs an automatic current stop if the motor is in an unforeseen overload situation. When the adjusted current is exceeded the unit stops the actuator, protecting the actuator from overload and the application from mechanical damage.
12v or 24v DC versions
Adjustable current trip (see table)
Reverse to reset
|
|
|
|
AC to DC DIN RAIL mountable Power Supply for
Industrial Linear Actuators.
Variable Voltage input 85 - 264v AC
Output 24v DC
Current up to 10amps in the standard range
Short Circuit Protection
Internal Input Filter
2 Year Warranty |
|
|
|
IDC Analog Position Controls use an internal potentiometer for position feedback.
The control can accept an analog position signal (0/10v or 4/20mA) directly from a PLC, sensor, or external potentiometer/joystick.
For additional details Please make contact
|
|
|
|
IDC has three sizes of rodless electric actuator, each can be fitted with :- DC Motor, Stepper Motor or Servo Motor.
Size / Ratings
Ball screw drives R2A R3 R4
Max. Thrust N 450 1300 3100
Max. Speed N 760 760 1000
Max.Stroke mm 2000 2500 3500
Body mm (sq) 51 65 91x108
Belt Drives R2A R3 R4
Max. Thrust N 450 890 1780
Max. Speed N 2000 3000 3000
Max.Stroke mm 2000 2500 3500
Body mm (sq) 51 65 91x108
For full technical specifications Please make contact |
|
|
|
IDC has five sizes of electric cylinders, each can be fitted with:- DC Motor, Stepper Motor or Servo Motor.
| Size/Ratings | N2 | EC2 | EC3 | EC4 | C5 | | Thrust N | 2670 | 3600 | 7200 | 12000 | 25000 | | Max. mm/s | 760 | 1280 | 1280 | 1330 | 1330 |
Max.Stroke mm | 420 | 750 | 1000 | 1500 | 1500 |
| Body mm (sq) | 51 | 55 | 68 | 92 | 92 |
Click Here To Read About Our Electric-Cylinders
|
|
|
|
Simple positioning to predetermined by preset limit switches attached to the body of the actuator or electric cylinder
Limit switch control is a very cost effective solution for many applications.
For full technical specifications Please make contact |
|
|
|
IDC's Impulse microstepping drive is the newest addition to their family of high performance microstepping drives and controls.
Rated 4 amps at 110 volt
For full technical specifications Please make contact
|
|
|
|
The NextStep MicroStepping
8 amp rating 110 and 230 volt option
Accepts Standard Step & Direction or optional CW/CCW step input
For full technical specifications Please make contact
|
|
|
|
IDC's Impulse- Motion Node microstepping drive as the newest addition to the family of high performance microstepping drives and controls.
7 Configurable Moves, Homing Routine, Incremental or Absolute Moves
For full technical specifications Please make contact |
|
|
|
Not only can we supply the actuator and controller.
We can also suuply the cables,limit switches, software and pre-programmed control.
This means your system is factory tested and ready run. "Straight out of the Box"
AT NO EXTRA COST
For full technical specifications Please make contact |
|
|
|
The SmartStep is a programmable microstepping indexer/drive.
Uses IDC’s powerful IDeal™ programming language.
8 amps capacity which means it can handle motors up to 42 frame
For full technical specifications Please make contact |
|
|
|
|
|
|
|
